Hot Water Meter
A hot water meter is a water meter used to measure the flow of hot water at 30~90°C. The hot water meter has the characteristics of high-temperature resistance and high precision. At present, it has been widely used in schools, apartments, hotels, and residential buildings. Let's take a look at the characteristics and installation methods of hot water meters.
Characteristics:
1. The hot water meter can work normally when the water temperature is between 0℃-90℃.
2. The base table of the hot water meter is made of high temperature and heat resistant materials, with high precision and a small starting flow.
3. The valve of the hot water meter adopts the patented ball suspension technology, and there will be no valve opening and water leakage caused by thermal expansion and cold contraction.
Installation Precautions:
1. When the hot water meter is installed, the direction of the arrow on the case should be the same as the direction of the water flow, and it should be installed horizontally. The installation location of the water meter should avoid exposure to the sun, and it is convenient for disassembly and observation. If it is in the north, insulation measures should be taken in winter;
2. When the hot water meter is installed, the direction of the arrow on the case should be the same as the direction of the water flow, and it should be installed horizontally. The installation location of the water meter should avoid exposure to the sun, and it is convenient for disassembly and observation. If it is in the north, insulation measures should be taken in winter.
3. When installing the water meter at the water inlet end of the boiler, it must be installed back to the stop width to prevent the backflow of hot water and steam from damaging the water meter.
4. It is strictly forbidden to place any items above the water meter. Pay attention to moisture-proof, moisture-proof, and it is strictly forbidden for water droplets to penetrate into the water meter controller to damage the control system and affect the normal use of users
5. After long-term use, the error is caused by debris blockage or parts wear, etc., and it must be used after inspection. Users with lead seals on the water meter are not allowed to open, and if abnormal phenomena are found, they should notify the water company or the real estate property company for maintenance.
Normally, people use cold water meters more than hot water meters. If you are looking for any water meter, such as a WiFi water meter, Lora WAN water meter, etc., please feel free to contact us.
