What Problems Should Be Paid Attention to In the Installation of IoT Water Meters

The IoT water meter is very popular with water companies because it can realize remote meter reading without wiring. So as far as the installation precautions of the IoT water meter are concerned, what problems should be paid attention to when installing the IoT water meter? The editor of the remote meter reading system will give you a good introduction.

Like mechanical water meters, the installation of IoT water meters requires attention:

1. The water meter should be installed horizontally (except for the horizontal and vertical installation of the vertical water meter), the dial should be upward, and the arrow on the case should be consistent with the direction of the water flow.

2. When installing the IoT water meter, the hemp wire, ore and other debris in the pipeline should be removed to prevent the water filter from clogging, otherwise the word value error will increase, and the water supply will be affected.

3. The installation location of the water meter should choose a place that is convenient for disassembly and meter reading and should prevent pollution from exposure to sunlight and freezing. At the same time, a valve should be installed before the water meter is installed, so that the water meter can be disassembled and installed when the water is cut off.

4. The water meter is a precision measuring instrument. In use, strong external force should be prevented from acting on the meter body. The user cannot destroy the lead seal and disassemble the internal components by himself.

5. When choosing the diameter of the IoT water meter, it is not only necessary to consider the diameter of the pipeline at the installation site, but also the size of the frequently used flow to select a water meter with a suitable diameter. It is advisable that the frequently used flow is close to or less than the required flow of the water meter.