How To Maintain the Water Meter When Using the Remote Water Meter?
In the process of using the remote water meter, you must pay attention to the selection of the caliber. Only when the appropriate caliber is installed will it be more convenient. In addition, you can see that there are arrows on the table when the surface is facing up, so when installing, you must pay attention to the direction of the water meter inlet and the water flow, so that it can be used correctly. In addition, during the installation process, you must pay attention to the selection of the installation location and try not to install it in an environment where the temperature is too low, especially in the environment of minus degrees Celsius, which will shorten the service life of the water meter. Also, the water meter cannot be submerged in water or exposed to the sun during installation. If it is a new installation, be sure to rinse the sundries in the pipeline so that it can be installed, so as to avoid the dirt in the pipeline that will affect the blockage of the water meter and affect the use.
The remote water meter can also install valves before and after the water meter, which can be opened when it is used. One of their important functions is that the water meter can be directly replaced as long as the valve is closed during replacement. And during the installation process, the position of the water meter must be guaranteed, and there is a relatively straight pipe. In addition, the outlet is higher. The installation and use of wireless water meters are the same, but the installation of wireless water meters is simpler. The wireless water meter has a built-in battery, and the battery inside must be covered after replacement, otherwise the battery will easily get wet. And we must pay attention to the usage in time, such as winter, the weather is relatively cold to prevent freezing.
When using this kind of water meter in winter, the remote water meter has a relatively long life. However, you should also pay attention to the influence of temperature. After all, it is best to keep warm in a low temperature environment so that it can operate correctly. If you do not keep warm, the water meter will not freeze, but other pipes will also affect normal use. And this kind of strong magnetic thing must be avoided to be close to the water meter, so as not to affect the normal use. There are still many users of remote water meters using wireless transmission. This kind of installation is simple and does not require wiring. Therefore, the application in the market is still very wide, and during transportation, we must pay attention to avoid collision, and put it away according to the packaging to ensure the quality of the water meter.
