Function and Features of Remote-Control Energy Meter Reading System
The remote meter reading system is a network management system that integrates the latest computer technology, network technology, communication technology, automatic measurement technology and automatic control technology. The remote meter reading system not only saves a lot of manpower and material resources, but also avoids errors caused by manual copying. At the same time, the speed of data analysis is greatly accelerated. Compared with other meter reading methods, it has the advantages of low construction and operation cost, stable network, simple networking, and strong real-time performance.
The remote meter reading system consists of three parts: management center computer, management software and 485 bus or GPRS communication terminal. The distributed structure and modular design are adopted, and all equipment are equipped with microprocessors and can operate independently. The user terminal is always online and automatically sends real-time data on site. Moreover, it can respond to the query and control instructions of the management center computer in time.
Function introduction of remote meter reading system:
The data analysis system automatically generates various reports and draws various curves or bar graphs by analyzing the uploaded data, so that managers can grasp the user's energy consumption status in time, and provide timely and reliable information for production, management, charging and decision-making.
The loss management system will automatically calculate the line loss or pipe loss. If the difference between the total meter and the sub-meter of the monitoring line exceeds the reasonable loss range, the system will alarm and prompt to facilitate the management personnel to check and stop leaks as soon as possible.
Alarm management for abnormal situations in the measurement data of each measurement point, such as temperature, pressure, flow, current exceeding the limit, etc., the system will automatically alarm and prompt, and can also notify the main management personnel by SMS, so as to find problems in time.
The CCM communication control module can be set for the remote control field instrument, and the CCM module can accept the instructions from the management center computer to open or close the valve or relay, so as to realize the remote real-time control function.
The billing management system can calculate expenses according to the transcribed data and generate user settlement bills; for prepaid users, it can generate a consumption list to facilitate user reconciliation; it can also generate recharge detailed bills to facilitate financial reconciliation by the management department.
Prepaid management Input the prepaid amount into the management center computer, the system settles the cost once a day, deducts it from the prepaid, reminds the user when the balance is insufficient, and remotely shuts down when the balance is zero.
