What Matters Should Be Paid Attention to When Using the IoT Water Meter?

The Internet of Things water meter belongs to the wireless remote water meter. The problems that need to be paid attention to in the use process are:

1. The installation location of the IoT water meter needs to avoid direct sunlight and the erosion of harmful gases and liquids. At the same time, for special areas, low-temperature antifreeze measures should be taken.

2. The installation environment of the IoT water meter should be clean and tidy, and it is easy to verify the meter reading and replace the water meter. Before the water meter is installed, the debris in the pipeline must be removed.

3. During the use of the IoT water meter, the wear, corrosion and other wearing parts of the parts should be repaired in time, and the technical supervision department should be checked regularly.

4. Ensure that the front and rear of the water meter have a long enough straight pipe section, and the installation position of the water meter cannot be too close to the wall, which is particularly important for the horizontal screw-wing water meter. There should be a straight pipe no less than 10 times the diameter of the water meter in front of the meter, and a straight pipe no less than 5 times the diameter of the water meter behind the meter.