Is The Installation of The Remote Water Meter Very Troublesome?
The remote water meter is a kind of smart water meter, and it is very simple to install. Pay attention to the diameter of the water meter and be sure to install it horizontally. The surface of the water meter is facing up, and the direction of the arrow on the meter body is consistent with the direction of the water flow. Be sure to avoid exposure to the sun during installation, and the water meter will have an impact after this exposure. Many people know it, but they may not pay attention to this aspect during installation. Therefore, when installing, we must pay attention to the appropriate installation location, avoid long-term exposure to the sun, avoid being flooded, avoid being frozen, and avoid being polluted.
When disassembling or reading the meter, you need to return this thing to its original position.
The newly installed pipeline must clean the sand and gravel in the pipeline and then install the water meter, otherwise it will easily cause the failure of the water meter. Valves should be installed on the upper and lower ends of the remote water meter, and make sure that the valve is in an open state when using it. If it is turned on, there is no big problem in using it. The upstream and downstream of the water meter must be arranged with a straight pipe section or an upper rectifier, and the length of the upstream means must not be less than 10D. After installing the water meter, try to prevent clogging and prevent clogging. If there are some weeds and sediment in the pipe, it will affect the normal recorded water volume of the water meter at this time. This is a very important aspect that everyone must keep in mind. In fact, when installing the remote water meter, there will be professional staff to install it. You don't need to worry too much, just say that you understand it yourself.
When installing the remote water meter, we should pay attention that there are two types of water meters to choose from. One is that communication lines need to be arranged, so it will be a little more troublesome to install. But the other one does not require wiring. Because it is wireless transmission, installation is more convenient. If there is no interference source nearby, the effect is still very good, and the accuracy is very high. With one aspect of remote management and monitoring, it is still a very good choice for water supply units.
