How Does the Remote Water Meter Work?
The remote water meter adds electronic modules to the ordinary mechanical water meter, as well as signal acquisition and data processing, and transmits it to the hand-reading meter reading device through communication. It sounds complicated, but in fact, this integrated design can better record the water consumption. Of course, the numbers can also be read directly. For the water supply department, each water meter has a code. Therefore, the management system also knows how much water is used by the water meter of each household.
The ordinary water meter used by the remote water meter and the electronic part are still very good. It can be added to the hot and cold water based on the output system of the remote transmission, which can better calculate the water consumption. In the selection of water meters, work must be considered. For example, the selection of hot and cold water used is different and the water pressure should be considered. And according to the pressure loss of the water meter and the choice of the diameter of the water meter, attention should be paid to whether it can be adapted. After all, the engineering diameter of this water meter is still very important, which determines the commonly used amount of water meters. So, the total water volume should not exceed the maximum flow limit of the water meter.
When installing the remote water meter, you must pay attention to the installation location according to the requirements. If it must be installed vertically, it is best to maintain a better installation environment. In addition, the location where the water meter is installed cannot be submerged by water, nor can it be affected by rainwater. Because the position of the water meter in some places will be affected by the rain, it will also affect the normal work. Due to its unique characteristics, such a remote water meter is not only afraid of power outages, but also disconnected. In theory, there are digital display and mechanical reading. Therefore, this dual display is very good for both users and water supply departments. More importantly, it can monitor the operation of the water meter in real time and know how the operation of the water meter is. And there is no need to read the meter, which improves the efficiency and avoids the trouble of on-site meter reading. And because the functions are relatively complete, the water meter has its own valve, which makes the management of the water supply department more convenient.
