About The Function And Characteristics Of The Collector

1. The collector, the remote meter and the concentrator together form a remote meter reading control and management system. The collector is used to expand the data collection range of the concentrator, and perform data collection and valve control for water, electricity, gas, and heat meters. The collector has two channels, upstream and downstream. The uplink channel adopts micro-power wireless mode and concentrator to realize data transmission. The downlink channel can use micro-power wireless mode, MBUS bus mode or RS485 bus mode to collect and store the data of the meter under its jurisdiction.

2. Features:

1). Built-in micro-power multi-channel wireless data transmission module, with multiple network communication frequency bands, strong anti-interference ability.

2). It has the function of wireless ad hoc network, the maximum relay depth can reach ten levels, the signal coverage is wide, and there is no blind spot.

3). Automatic maintenance of wireless meter reading network, multi-path data transmission, robust network and high success rate of meter reading.

4). With automatic frequency calibration function, it can work normally in bad weather environment.

5). With automatic addressing function, without manual intervention, the system debugging is simple and easy to operate. .

6). The data transmission adopts the matrix codec algorithm, the data is accurate and the confidentiality is good.

7). Using non-volatile high-reliability memory and data error correction technology, data storage is safe and reliable.

8). With bus failure automatic shutdown function to protect the safety of collectors and meters.

9). It has the function of automatic control of bus power supply and prolongs the service life of the meter.

10). With watchdog anti-crash design, it can run for a long time outdoors without crashing.